|
|
NOTE:
Hovercraft
catalog still under construction
Prices in catalog are ex works Slovenia - EUROPE, exclude
VAT, exclude discounts
All prices and
specifications are subject to change without notice.
GRP -
fiberglass parts with prices and specifications offered by MAD hovercraft:
|
code |
product name |
product description |
picture |
|
H01 |
MAD hull
|
MAD hull is out of mould with only
necessary reinforcements
-
where engine frame is fitted 10mm
waterproof plywood
-
where duct is fitted
-
sandwich reinforced only at sides
where you step on, when you enter
Air canal and plenum
chamber are glued together with main hull - holes for air supply and skirt
system are not made.
Hovercraft hull
price: 1270 EUR
|
|
|
H02 |
MAD duct
|
MAD 920 mm duct is ready to be
installed on hovercraft hull. Inside of duct are fitted 6 flow straighter
with 2 combiners, so cone in the middle is combined. Hull needs
finalization work only from inside (painting). Flow
straightors are left or right directional.
Hovercraft duct
price: 430 EUR |
|
|
H03 |
MAD seat console |
MAD seat console is ready to be
installed on hull, supplied with plastic steering
stabilization and with killing engine switch.
Hovercraft seat
price: 180 EUR |
|
|
H04 |
2 BUFO
aerodynamic composite rudders |
2 MAD
aerodynamic rudders for MAD hovercraft duct
- very light and strong painted composite, made of sandwich combination
fiberglass/airex/fiberglass. Rudder is aerodynamic shape with
5mm aluminum at top and at bottom to fix mechanisms
where needed.
Rudders are supplied with upper and bottom aerodynamic rudder frame, and rudder fitting points with
4 plastic
hubs to suit MAD hovercraft duct.
Rudders are available also by order - any
size any color.
2 hovercraft rudder
price: 270 EUR
|
 |
|
H05 |
MAD filter cover |
MAD filter cover -
protects air
filter from water spray caused by hovercraft at hump or other water spray.
Using MAD filter cover your engine will run safer on water or in raining
conditions.
Filter cover
price: 45 EUR |
 |
GRP -
fiberglass options/upgrades with prices and specifications offered by MAD
hovercraft:
|
code |
product name |
product description |
picture |
|
U01 |
MAD sandwich reinforced hull |
If hovercraft will be used for extreme
rides, that includes jumps on dry land, and speeds over 70 km/h, or engine
stronger than 50 HP, extra reinforced body is highly recommended. Hull can
not be reinforced later.
Reinforcements are composite of
fibreglass/airex/fibreglass what makes hovercraft hull really strong and
light as well.
Upgrade U01 rises
price of
hovercraft hull
H01:
+ 200 EUR
|
 |
|
U02 |
MAD 100% flotation |
Highly recommended option if
hovercraft will be operating on deep water, sea, or wild river. Filling
plenum chamber with 150 litters of polystyrene guaranties you 100 %
flotation on water if engine is off. Hovercraft will not sink completely
even if water brakes into cockpit. Considering this option when you are
already in situation of sinking is too late.
Upgrade U02 rises
price of
hovercraft hull
H01:
+ 160 EUR
|
 |
|
U03 |
MAD system of
skirt air supply |
With this option, your hovercraft skirt system is ready
for final installation of skirt.
Option includes, complete holes of air supply done, upper
skirt hole fixing holes, P-clip installation for bottom fitting of
skirts
Upgrade U03 rises
price of
hovercraft hull
H01:
+ 150 EUR |
 |
|
U04 |
MAD plywood bottom |
Highly recommended option, specially
if hovercraft will be operating on hard and difficult land. It protects
bottom of craft from sharp rocks, that can seriously damage hovercraft
bottom. When hovercraft is operated in extreme conditions or is driven by
beginner, bottom can be damaged if it is not good protected.
Upgrade U04 rises
price of
hovercraft hull
H01:
+ 120 EUR
|
 |
|
U05 |
MAD aluminum skids |
Aluminum skids at
bottom extra protect bottom of hovercraft
Upgrade U05 rises
price of
hovercraft hull
H01:
+ 100 EUR |
 |
|
U06 |
MAD front store place |
MAD store place separates complete
front part from air canal. Place can be used to store necessary tools and
other small things in front part of hovercraft, Very useful place. Price
includes small door in cockpit installed on hovercraft.
Upgrade U06 rises
price of
hovercraft hull
H01:
+ 150 EUR
|
 |
|
U07 |
MAD laminate protection |
With top-coat protection of laminate
from inner side of MAD hovercraft, MAD hull will last much longer longer.
This option is recommended if hovercraft will be operating on water areas,
specially at sea, and snow areas.
Upgrade U07 rises
price of
hovercraft hull
H01:
+ 100 EUR
|
Picture preview not availibe |
|
U08 |
MAD multi color |
Signatures, text or logotypes made in
hull (gel coat) structure makes your hovercraft very special and unique.
Price includes 2 signatures or
logotypes
-
100 cm x 20cm at side
-
60 cm x 25 cm at front
By order we can made also multi colour
hovercraft.
For price please
sent inquire with logo pictures, and descritpion.
|
 |
|
|
